‧Supports up to 360mm long video card.
‧Available Fan Ports:
3x120mm or 3x140mm Fan ports in the front
(CSAZ-460A: 3x120mm ARGB fan included)
3x120mm or 2x140mm Fan ports on the top
‧Supports radiators up to 280/360mm in the Front
‧Supports radiators up to 240mm in the Top
|Type||ATX Mid Tower|
|Side Panel Window||Left side panel: Slidable tempered glass panel|
|Max CPU Cooler Height||UP to 165mm|
|Max video Card Length||Up to 360mm long video card|
|Power Supply||Not Included|
|Motherboard Compatibility||<270mm E-ATX、ATX、Micro ATX、ITX|
|External 5.25" Drive Bays:||0|
|Internal 2.5" Drive Bays||Up to 4|
|Internal 3.5" Drive Bays||Up to 2|
|Top Ports||Power button, reset button,led button, HD Audio, USB 3.0 x 1, USB2.0x2|
|Dimension with Case Stand(HxWxD)||470X215X443mm/18.5X8.5X17.4 inches|
|Tempered Glass on Four Sides Window||High-quality tempered glass side window allows for clear visuals to inner components|
|Addressable RGB Light Effects:||CSAZ-460A:All ARGB light synchronize devices connect to the ARGB control board.|
|Available Fan Ports||3x120mm or 3x140mm Fan ports in the front|
|(CSAZ-460A: 3x120mm ARGB fan included)|
|3x120mm or 2x140mm Fan ports on the top|
|Water Cooling||Supports radiators up to 280/360mm in the Front|
|Supports radiators up to 240mm in the Top|
|Dust Filters:||Removable (magnetic) mesh net on the top, Steel dust filter on bottom of chassis.|
|Power Supply Support:||Bottom mounted ATX Power Supply|
Supports VIDEO cards up to 360mm in length.
Supports up to 120mm fan x2
Multifunctional hard disk bracket support 3.5”HDD or 2.5” SSD x 1
Multifunctional hard disk cage support 3.5”HDD or 2.5” SSD x 1
2.5" SSD metal tray support 2.5” SSD x 2
▪Supports up to 3x120mm or 3x140mm fan
▪Supports up to 360mm water cooling radiator in height.
▪Supports up to 1x120mm fan
▪Supports up to 3x120mm or 2x140mm fan
▪Supports up to 240mm water cooling radiator in length.
▪Press the LED button to cycle through different RGB lighting modes, controlled by the LED button though the ARGB control board.
▪Hold the LED button for 3 seconds to switch the RGB control function between motherboard RGB software and LED button.